$ cat /proc/mtrr Linux version 2.6.22-3-amd64 (Debian 2.6.22-6) (maks@debian.org) (gcc version 4.1.3 20071019 (prerelease) (Debian 4.1.2-17)) #1 SMP Sun Nov 4 18:18:09 UTC 2007 Command line: root=/dev/sda2 ro BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009d800 (usable) BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000ce000 - 00000000000d0000 (reserved) BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000bff60000 (usable) BIOS-e820: 00000000bff60000 - 00000000bff69000 (ACPI data) BIOS-e820: 00000000bff69000 - 00000000bff80000 (ACPI NVS) BIOS-e820: 00000000bff80000 - 00000000c0000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000340000000 (usable) Entering add_active_range(0, 0, 157) 0 entries of 3200 used Entering add_active_range(0, 256, 786272) 1 entries of 3200 used Entering add_active_range(0, 1048576, 3407872) 2 entries of 3200 used end_pfn_map = 3407872 DMI present. ACPI: RSDP 000F59A0, 0014 (r0 PTLTD ) ACPI: RSDT BFF63C66, 003C (r1 PTLTD RSDT 6040000 LTP 0) ACPI: FACP BFF68E48, 0074 (r1 INTEL TUMWATER 6040000 PTL 3) ACPI: DSDT BFF6508E, 3DBA (r1 Intel BLAKFORD 6040000 MSFT 100000E) ACPI: FACS BFF69FC0, 0040 ACPI: APIC BFF68EBC, 0090 (r1 PTLTD APIC 6040000 LTP 0) ACPI: MCFG BFF68F4C, 003C (r1 PTLTD MCFG 6040000 LTP 0) ACPI: BOOT BFF68F88, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1) ACPI: SPCR BFF68FB0, 0050 (r1 PTLTD $UCRTBL$ 6040000 PTL 1) ACPI: SSDT BFF63CA2, 13EC (r1 PmRef CpuPm 3000 INTL 20050228) No NUMA configuration found Faking a node at 0000000000000000-0000000340000000 Entering add_active_range(0, 0, 157) 0 entries of 3200 used Entering add_active_range(0, 256, 786272) 1 entries of 3200 used Entering add_active_range(0, 1048576, 3407872) 2 entries of 3200 used Bootmem setup node 0 0000000000000000-0000000340000000 Zone PFN ranges: DMA 0 -> 4096 DMA32 4096 -> 1048576 Normal 1048576 -> 3407872 early_node_map[3] active PFN ranges 0: 0 -> 157 0: 256 -> 786272 0: 1048576 -> 3407872 On node 0 totalpages: 3145469 DMA zone: 56 pages used for memmap DMA zone: 1031 pages reserved DMA zone: 2910 pages, LIFO batch:0 DMA32 zone: 14280 pages used for memmap DMA32 zone: 767896 pages, LIFO batch:31 Normal zone: 32256 pages used for memmap Normal zone: 2327040 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 (Bootup-CPU) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x04] enabled) Processor #4 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) Processor #2 ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] enabled) Processor #6 ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 8, address 0xfec00000, GSI 0-23 ACPI: IOAPIC (id[0x09] address[0xfec80000] gsi_base[24]) IOAPIC[1]: apic_id 9, address 0xfec80000, GSI 24-47 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Setting APIC routing to flat Using ACPI (MADT) for SMP configuration information swsusp: Registered nosave memory region: 000000000009d000 - 000000000009e000 swsusp: Registered nosave memory region: 000000000009e000 - 00000000000a0000 swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000ce000 swsusp: Registered nosave memory region: 00000000000ce000 - 00000000000d0000 swsusp: Registered nosave memory region: 00000000000d0000 - 00000000000e4000 swsusp: Registered nosave memory region: 00000000000e4000 - 0000000000100000 swsusp: Registered nosave memory region: 00000000bff60000 - 00000000bff69000 swsusp: Registered nosave memory region: 00000000bff69000 - 00000000bff80000 swsusp: Registered nosave memory region: 00000000bff80000 - 00000000c0000000 swsusp: Registered nosave memory region: 00000000c0000000 - 00000000e0000000 swsusp: Registered nosave memory region: 00000000e0000000 - 00000000f0000000 swsusp: Registered nosave memory region: 00000000f0000000 - 00000000fec00000 swsusp: Registered nosave memory region: 00000000fec00000 - 00000000fec10000 swsusp: Registered nosave memory region: 00000000fec10000 - 00000000fee00000 swsusp: Registered nosave memory region: 00000000fee00000 - 00000000fee01000 swsusp: Registered nosave memory region: 00000000fee01000 - 00000000ff000000 swsusp: Registered nosave memory region: 00000000ff000000 - 0000000100000000 Allocating PCI resources starting at c2000000 (gap: c0000000:20000000) SMP: Allowing 4 CPUs, 0 hotplug CPUs PERCPU: Allocating 37896 bytes of per cpu data Built 1 zonelists. Total pages: 3097846 Kernel command line: root=/dev/sda2 ro Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) time.c: Detected 3200.183 MHz processor. Console: colour VGA+ 80x25 Checking aperture... Calgary: detecting Calgary via BIOS EBDA area Calgary: Unable to locate Rio Grande table in EBDA - bailing! PCI-DMA: Using software bounce buffering for IO (SWIOTLB) Placing software IO TLB between 0x1065000 - 0x5065000 Memory: 12319852k/13631488k available (2008k kernel code, 262024k reserved, 945k data, 296k init) Calibrating delay using timer specific routine.. 6405.95 BogoMIPS (lpj=12811911) Security Framework v1.0.0 initialized SELinux: Disabled at boot. Capability LSM initialized Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) Mount-cache hash table entries: 256 CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 2048K CPU 0/0 -> Node 0 using mwait in idle threads. CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU0: Thermal monitoring handled by SMI SMP alternatives: switching to UP code ACPI: Core revision 20070126 Using local APIC timer interrupts. result 16667585 Detected 16.667 MHz APIC timer. SMP alternatives: switching to SMP code Booting processor 1/4 APIC 0x4 Initializing CPU#1 Calibrating delay using timer specific routine.. 6400.87 BogoMIPS (lpj=12801742) CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 2048K CPU 1/4 -> Node 0 CPU: Physical Processor ID: 1 CPU: Processor Core ID: 0 CPU1: Thermal monitoring enabled (TM1) Intel(R) Xeon(TM) CPU 3.20GHz stepping 04 checking TSC synchronization [CPU#0 -> CPU#1]: passed. SMP alternatives: switching to SMP code Booting processor 2/4 APIC 0x2 Initializing CPU#2 Calibrating delay using timer specific routine.. 6400.75 BogoMIPS (lpj=12801518) CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 2048K CPU 2/2 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU2: Thermal monitoring enabled (TM1) Intel(R) Xeon(TM) CPU 3.20GHz stepping 04 checking TSC synchronization [CPU#0 -> CPU#2]: Measured 696 cycles TSC warp between CPUs, turning off TSC clock. Marking TSC unstable due to check_tsc_sync_source failed SMP alternatives: switching to SMP code Booting processor 3/4 APIC 0x6 Initializing CPU#3 Calibrating delay using timer specific routine.. 6400.99 BogoMIPS (lpj=12801990) CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 2048K CPU 3/6 -> Node 0 CPU: Physical Processor ID: 1 CPU: Processor Core ID: 1 CPU3: Thermal monitoring enabled (TM1) Intel(R) Xeon(TM) CPU 3.20GHz stepping 04 Brought up 4 CPUs migration_cost=1411 NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using MMCONFIG at e0000000 - e06fffff PCI: No mmconfig possible on device 07:01 ACPI: Interpreter enabled ACPI: (supports S0 S1 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2.BMD0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2.BMD0.BPD0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2.BMD0.BPD2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2.BMF3._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11 14 15) *9 ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 6 7 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 6 7 10 11 14 15) *0, disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: ACPI device : hid PNP0A03 pnp: ACPI device : hid PNP0C02 pnp: ACPI device : hid PNP0200 pnp: ACPI device : hid PNP0C04 pnp: ACPI device : hid PNP0B00 pnp: ACPI device : hid PNP0800 pnp: ACPI device : hid INT0800 pnp: ACPI device : hid PNP0303 pnp: ACPI device : hid PNP0F13 pnp: ACPI device : hid PNP0501 pnp: ACPI device : hid PNP0501 pnp: ACPI device : hid PNP0700 pnp: ACPI device : hid PNP0401 pnp: PnP ACPI: found 13 devices ACPI: ACPI bus type pnp unregistered usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report NET: Registered protocol family 8 NET: Registered protocol family 20 PCI-GART: No AMD northbridge found. ACPI: RTC can wake from S4 pnp: the driver 'system' has been registered pnp: match found with the PnP device '00:01' and the driver 'system' pnp: 00:01: iomem range 0xe0000000-0xefffffff could not be reserved pnp: 00:01: iomem range 0xfee00000-0xfee0ffff could not be reserved pnp: 00:01: iomem range 0xfec80000-0xfec80fff has been reserved pnp: 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved PCI: Bridge: 0000:02:00.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:02:02.0 IO window: 2000-2fff MEM window: c8200000-c82fffff Time: acpi_pm clocksource has been installed. PREFETCH window: disabled. PCI: Bridge: 0000:01:00.0 IO window: 2000-2fff MEM window: c8200000-c82fffff PREFETCH window: disabled. PCI: Bridge: 0000:01:00.3 IO window: 3000-3fff MEM window: c8300000-c83fffff PREFETCH window: ca000000-cbffffff PCI: Bridge: 0000:00:02.0 IO window: 2000-3fff MEM window: c8100000-c83fffff PREFETCH window: ca000000-cbffffff PCI: Bridge: 0000:00:1c.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:1e.0 IO window: 4000-4fff MEM window: c8400000-c84fffff PREFETCH window: d0000000-d7ffffff ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:02.0 to 64 ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:01:00.0 to 64 ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:02:00.0 to 64 ACPI: PCI Interrupt 0000:02:02.0[A] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:02:02.0 to 64 PCI: Setting latency timer of device 0000:01:00.3 to 64 ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1c.0 to 64 PCI: Setting latency timer of device 0000:00:1e.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 524288 (order: 10, 4194304 bytes) TCP established hash table entries: 2097152 (order: 13, 50331648 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 2097152 bind 65536) TCP reno registered checking if image is initramfs... it is Freeing initrd memory: 5158k freed Simple Boot Flag at 0x38 set to 0x1 audit: initializing netlink socket (disabled) audit(1197045873.508:1): initialized VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) Boot video device is 0000:07:01.0 PCI: Setting latency timer of device 0000:00:02.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:02.0:pcie00] Allocate Port Service[0000:00:02.0:pcie01] PCI: Setting latency timer of device 0000:00:1c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.0:pcie00] Allocate Port Service[0000:00:1c.0:pcie02] Allocate Port Service[0000:00:1c.0:pcie03] PCI: Setting latency timer of device 0000:01:00.0 to 64 Allocate Port Service[0000:01:00.0:pcie10] Allocate Port Service[0000:01:00.0:pcie11] PCI: Setting latency timer of device 0000:02:00.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:02:00.0:pcie20] Allocate Port Service[0000:02:00.0:pcie21] PCI: Setting latency timer of device 0000:02:02.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:02:02.0:pcie20] Allocate Port Service[0000:02:02.0:pcie21] Evaluate _OSC Set fails. Status = 0x0005 Evaluate _OSC Set fails. Status = 0x0005 aer_init: AER service init fails - Run ACPI _OSC fails aer: probe of 0000:00:02.0:pcie01 failed with error 2 Real Time Clock Driver v1.12ac Linux agpgart interface v0.102 (c) Dave Jones Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A pnp: the driver 'serial' has been registered pnp: match found with the PnP device '00:09' and the driver 'serial' 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A pnp: match found with the PnP device '00:0a' and the driver 'serial' 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize pnp: the driver 'i8042 kbd' has been registered pnp: match found with the PnP device '00:07' and the driver 'i8042 kbd' pnp: the driver 'i8042 aux' has been registered pnp: match found with the PnP device '00:08' and the driver 'i8042 aux' PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 Freeing unused kernel memory: 296k freed ACPI: Processor [CPU0] (supports 8 throttling states) ACPI: Processor [CPU1] (supports 8 throttling states) ACPI: Processor [CPU2] (supports 8 throttling states) ACPI: Processor [CPU3] (supports 8 throttling states) ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126] ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126] ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126] ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126] USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1d.0: irq 17, io base 0x00001800 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI Copyright (c) 1999-2006 Intel Corporation. SCSI subsystem initialized 3ware 9000 Storage Controller device driver for Linux v2.26.02.009. libata version 2.21 loaded. ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001820 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001840 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1d.3 to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001860 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 128 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 17, io mem 0xc8000000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 8 ports detected ACPI: PCI Interrupt 0000:05:01.0[A] -> GSI 24 (level, low) -> IRQ 24 scsi0 : 3ware 9000 Storage Controller 3w-9xxx: scsi0: Found a 3ware 9000 Storage Controller at 0xc8300000, IRQ: 24. 3w-9xxx: scsi0: Firmware FE9X 3.08.02.007, BIOS BE9X 3.08.00.002, Ports: 12. ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:04:00.0 to 64 scsi 0:0:0:0: Direct-Access AMCC 9550SX-12 DISK 3.08 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] Very big device. Trying to use READ CAPACITY(16). sd 0:0:0:0: [sda] 4882708480 512-byte hardware sectors (2499947 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: disabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] Very big device. Trying to use READ CAPACITY(16). sd 0:0:0:0: [sda] 4882708480 512-byte hardware sectors (2499947 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: disabled, doesn't support DPO or FUA sda:<6>e1000: 0000:04:00.0: e1000_probe: (PCI Express:2.5Gb/s:Width x4) 00:30:48:89:d4:d2 sda1 sda2 sda3 sd 0:0:0:0: [sda] Attached SCSI disk e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection ACPI: PCI Interrupt 0000:04:00.1[B] -> GSI 19 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:04:00.1 to 64 e1000: 0000:04:00.1: e1000_probe: (PCI Express:2.5Gb/s:Width x4) 00:30:48:89:d4:d3 e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx pnp: the driver 'ide' has been registered ESB2: IDE controller at PCI slot 0000:00:1f.1 ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18 ESB2: chipset revision 9 ESB2: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x1880-0x1887, BIOS settings: hda:pio, hdb:pio Probing IDE interface ide0... kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. input: PC Speaker as /class/input/input0 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 intel_rng: FWH not detected pnp: the driver 'parport_pc' has been registered pnp: match found with the PnP device '00:0c' and the driver 'parport_pc' parport_pc 00:0c: reported by Plug and Play ACPI parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA] ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 19 EXT3-fs warning: maximal mount count reached, running e2fsck is recommended EXT3 FS on sda2, internal journal w83781d 0-002d: The W83627HF chip is better supported by the w83627hf driver, support will be dropped from the w83781d driver soon w83781d: Found a W83627HF chip at 0x290 w83781d w83781d.656: The W83627HF chip is better supported by the w83627hf driver, support will be dropped from the w83781d driver soon device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com kjournald starting. Commit interval 5 seconds EXT3 FS on sda3, internal journal EXT3-fs: mounted filesystem with writeback data mode. Adding 9775512k swap on /dev/sda1. Priority:-1 extents:1 across:9775512k Unable to find swap-space signature Adding 26623992k swap on /home/commun/swap1. Priority:-2 extents:6713 across:27078568k NET: Registered protocol family 15 e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Half Duplex, Flow Control: None e1000: eth0: e1000_watchdog: 10/100 speed: disabling TSO ip_tables: (C) 2000-2006 Netfilter Core Team Netfilter messages via NETLINK v0.30. nf_conntrack version 0.5.0 (8192 buckets, 65536 max) NET: Registered protocol family 10 lo: Disabled Privacy Extensions ADDRCONF(NETDEV_UP): eth0: link is not ready e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex, Flow Control: None e1000: eth0: e1000_watchdog: 10/100 speed: disabling TSO ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready eth0: no IPv6 routers present u32 classifier Performance counters on input device check on Actions configured uhci_hcd 0000:00:1d.3: remove, state 4 usb usb4: USB disconnect, address 1 uhci_hcd 0000:00:1d.3: USB bus 4 deregistered ACPI: PCI interrupt for device 0000:00:1d.3 disabled uhci_hcd 0000:00:1d.2: remove, state 4 usb usb3: USB disconnect, address 1 uhci_hcd 0000:00:1d.2: USB bus 3 deregistered ACPI: PCI interrupt for device 0000:00:1d.2 disabled uhci_hcd 0000:00:1d.1: remove, state 4 usb usb2: USB disconnect, address 1 uhci_hcd 0000:00:1d.1: USB bus 2 deregistered ACPI: PCI interrupt for device 0000:00:1d.1 disabled uhci_hcd 0000:00:1d.0: remove, state 4 usb usb1: USB disconnect, address 1 uhci_hcd 0000:00:1d.0: USB bus 1 deregistered ACPI: PCI interrupt for device 0000:00:1d.0 disabled ehci_hcd 0000:00:1d.7: remove, state 4 usb usb5: USB disconnect, address 1 ehci_hcd 0000:00:1d.7: USB bus 5 deregistered ACPI: PCI interrupt for device 0000:00:1d.7 disabled